SEVERE WARNING
WARNING
SIGNS FOR
TRANSPORTATION
AND SITE
• When transporting and
installing the appliance,
care should be taken to
ensure that no parts of
the refrigerating circuit
are damaged.
- Refrigerant leaking from the
pipe work could ignite or
cause an eye injury.
If a leak is detected, avoid
any naked fl ames or
potential sources of ignition
and air the room in which
the appliance is standing for
several minutes.
• In order to avoid the creation
of a fl ammable gas-air
mixture if a leak in the
refrigerating circuit occurs,
the size of the room in which
the appliance may be sited
depends on the amount of
refrigerant used.
• Never start up an appliance
showing any signs of
damage.
If in doubt, consult your
dealer. The room where the
refrigerator will be sited must
DA68-02710R-04.indb 4
DA68-02710R-04.indb 4
be 1 m³ in size for every 8 g
of R600a refrigerant inside
the appliance.
The amount of refrigerant in
your particular appliance is
shown on the identifi cation
plate inside the appliance.
SEVERE WARNING
WARNING
SIGNS FOR
INSTALLATION
• Do not install the
refrigerator in a damp
place or place where it
may come in contact
with water.
- Deteriorated insulation of
electrical parts may cause
an electric shock or fi re.
• Do not place this refrigerator
in direct sunlight or expose
to the heat from stoves,
room heaters or other
appliance.
• Do not plug several
appliances into the same
multiple power board.
The refrigerator should
always be plugged into its
own individual electrical
which has a voltage rating
English - 4
14. 1. 16.
14. 1. 16.
1:57
1:57