Inspire J36002-XY-1L Serie Notice De Montage - Utilisation - Entretien page 36

FR
2) Electrical Safety
The product should be installed by an authorized electrician in accordance to national wiring rules.
ES
The replacement of parts of the safety suspension system device shall be performed by the manufacturer,
its service agent or suitably quali ed persons.
PT
The mounting of the suspension system shall be performed by the manufacturer, its service agent or
suitably quali ed persons.
IT
An all-pole disconnector with isolating distance of 3mm must be incorporated in the xed wiring in
accordance with the national wiring rules.
EL
This product is in accordance with safety standards into force. Repairs should be exclusively performed
by quali ed technicians using original spare parts. Any breach of this instruction may be particularly
PL
dangerous for the users.
KZ
Speci c Safety Rules
3.
UA
Min: 2,3 m
RO
4. Environmental protection
EN
CAUTION!
5. Appliance speci cations
TECHNICAL CHARACTERISTICS
Rated voltage
Rated frequency
Rated wattage
Bulb type
Protection
IP number
Weight
Maximum fan ow rate
Service value
Fan sound power level
The fan base mounting bracket can support a load of 19 kgs.
The fan is to installed so that the blades are more than 2,3m above
Min: 0,6 m
the oor and the blades distance to wall min 0.6m.
Electrical products must not be thrown out with domestic waste. They must be taken
to a communal collecting point for environmentally friendly disposal in accordance
with local regulations. Contact your local authorities or stockist for advice on recycling.
The packaging material is recyclable. Dispose of the packaging in an environmentally
friendly manner and make it available for the recyclable material collection-service.
220V-240V
50Hz
Max.50W
E27 Max.60W
class I
IP 20
3.8kg
109.52 m /min
2.38 (m /min)/W
Max. 51.2 dB(A)
36