Rupes HSE73 Mode D'emploi page 10

EXTERNAL EXTRACTION
- During vertical surface works position the machine in such a way the extractor tube is turned downwards.
- Assembly: insert an extractor tube on the extractor connector (4) (Fig. 2);
- Connect the extractor tube to an adequate vacuum system.
NOISE EMISSION VALUES
Noise emission values determined according to EN 62841-2-4:
SOUND PRESSURE LEVEL
SOUND POWER LEVEL
UNCERTAINTY (K)
Use ear protection!
VIBRATION EMISSION VALUES
Vibration total values a h (triax vector sum) and uncertainty K determined according to EN 62841-2-4:
3 AXIS VIBRATION LEVEL (a
UNCERTAINTY (K)
Displayed emission values are comparative and are to be employed for a provisional assessment of the operator's risk exposure
during the work period. Appropriate evaluation of work period must also include tool's idle and stop periods. These emission
values represent the tool's main applications. If the tool is used for other applications, with other accessories, or if it does not
undergo regular maintenance, emission values can significantly increase during operations.
CAUTION: The indicated measurements refer to new power tools. Daily usage causes the noise and vibration values to change.
MAINTENANCE AND SERVICING
WARNING: All maintenance operation must be performed with the power disconnected.
Make sure to remove the power supply 9HP180LT or battery pack 9HB180LT from the tool and that the knob is in the OFF
position.
CLEANING
At the end of each work session, or when required, remove any dust from the body of the tool using a soft cloth, paying particular
attention to the motor ventilation slots.
No other maintenance operations must be undertaken by the user.
REPAIRS
Maintenance and cleaning of the inner parts like ball bearings, gears etc. or others, must be carried out only by an authorized
customer service workshop.
DISPOSAL (WEEE DIRECTIVE)
For EU countries only: According to the European Directive on Waste from electrical and electronic equipment and its
implementation in conformity with national standards, exhausted electrical equipment must be collected separately, in order
to be recycled in an environmentally friendly way. The product, when it reaches the end of its life, must not be dispersed in
the environment or thrown away as household waste. It must be disposed at authorized recycling centres (contact your local
authorities to know where to dispose of the product according to the law). The correct disposal of the product contributes to the
health and preservation of the environment. Illegal disposal of the product will entail penalties against the offenders.
EU DECLARATION OF CONFORMITY
We declare under our responsibility that the represented tools are in conformity with the directives:
2006/42/EC, 2014/30/EU, 2011/65/EU.
The tests have been carried out in accordance with the following standards:
EN 62841-1:2015 + AC:2015;
EN 62841-2-4:2014 + AC:2015;
EN IEC 55014-1:2021;
EN IEC 55014-2:2021;
EN IEC 61000-3-2:2019 + A1:2021;
EN 61000-3-3:2013 + A1:2019 + A2:2021;
EN IEC 63000:2018.
10
)
h
HSE73
dB(A) 66.5
dB(A) 76.5
dB 3.0
HSE73
m/s 2.70
2
m/s 0.30
2
Vermezzo con Zelo (MI), 03/10/2022
20071 - VERMEZZO CON ZELO (MI) - Italy
HSR73 HSS73
67.5 66.0
77.5 76.0
3.0 3.0
HSR73 HSS73
2.17 1.67
0.24 0.18
Technical file at:
RUPES S.p.A.
Via Marconi, 3/A - Loc. Vermezzo
G. Valentini