Hilti SF 8H-A22 Notice Originale page 23

All manuals and user guides at all-guides.com
The power tool is designed for professional use and may be
operated, serviced and maintained only by trained, authorized
personnel. This personnel must be informed of any special
hazards that may be encountered.
ancillary equipment may present hazards when used incorrectly
by untrained personnel or when used not as directed.
The working environment may be as follows: construction site,
workshop, renovation, conversion or new construction.
2.2 Chuck
Keyless chuck
2.3 Switches and operating controls
Control switch with electronic speed control
Four-speed gear selector, two-part
Forward / reverse selector switch with transport lock
Setting ring for torque, drilling and hammer drilling
NOTE
15 torque settings selectable
2.4 Grips
Pivotable side handle
Vibration-absorbing grip
2.5 Lubrication
Grease lubrication
2.6 The items supplied include (toolbox versions):
1 Power tool
1 Side handle
1 Operating instructions
1 Hilti toolbox
1 Hook wrench (SF 10M­A22)
2 Battery
1 Charger
2.7 The items supplied include (cardboard box versions):
1 Power tool
1 Side handle
1 Operating instructions
1 Hook wrench (SF 10M­A22)
NOTE
Additional items required for operating the tool
B 22/3.3 Li­Ion battery with C4⁄36­90, C4⁄36­350, C 4/36,
C 4/36­ACS or C 4/36­ACS TPS charger.
2.8 Li­Ion battery charge status and overheating indicator
LEDs light con-
LEDs blink
stantly
LED 1, 2, 3, 4 -
LED 1, 2, 3 -
LED 1, 2 -
LED 1 -
- LED 1
- LED 1
2.9 Power tool overloading and overheating indicator
The power tool is equipped with an electronic protection system
to prevent overloading and overheating. The power tool switches
itself off automatically in the event of overloading and overheating.
After releasing the control switch, the power tool may not restart
immediately when the switch is pressed again (while the power
tool is cooling down).
Printed: 14.11.2013 | Doc-Nr: PUB / 5161651 / 000 / 00
The power tool and its
en
Charge status C
C ≧ 75 %
50 % ≦ C < 75 %
25 % ≦ C < 50 %
10 % ≦ C < 25 %
C < 10 %
Battery overheated
19