Hilti SF 8H-A22 Notice Originale page 22

All manuals and user guides at all-guides.com
NOTE
Draws attention to an instruction or other useful information.
1.2 Explanation of the pictograms and other information
Warning signs
en
General warning Warning:
electricity
Obligation signs
Wear eye Wear a hard hat
protection
Wear breathing
protection
Symbols
Read the Volts
operating
instructions
before use
Revolutions per Hammer drilling
minute
Location of identification data on the power tool
The type designation can be found on the type identification
plate at the base of the power tool and the serial number on the
side of the casing. Make a note of this data in your operating
instructions and always refer to it when making an enquiry to your
Hilti representative or service department.
Type:
Generation: 01
Serial no.:
2 Description
2.1 Use of the product as directed
The SF 8­A22, SF 10M-A22 and SF 10W-A22 are hand-held
cordless drill/drivers for driving and removing screws and for
drilling in steel, wood, plastic, lightweight concrete and masonry.
The SF 8H-A22 is a hand-held, cordless hammer drill/driver for
driving and removing screws, for drilling in steel, wood and plastic
and for hammer drilling in lightweight concrete and masonry.
Working on materials hazardous to the health (e.g. asbestos) is
not permissible.
Do not use the battery as a power source for other unspecified
appliances.
Modification of the power tool or tampering with its parts is not
permissible.
To avoid the risk of injury, use only genuine Hilti accessories and
insert tools.
Observe the information printed in the operating instructions
concerning operation, care and maintenance.
18
Printed: 14.11.2013 | Doc-Nr: PUB / 5161651 / 000 / 00
Warning: caustic
substances
Wear ear Wear protective
protection gloves
Direct current Rated speed
under no load
Drilling without Return waste
hammering material for
recycling.