Oster TSSTTR2BDS Notice D'emploi page 4

USING YOUR TOASTER
1. Set the level of toasting using the
browning control. The higher the
number selected, the darker the toast
will be.
2. Place the bread into the toasting slots.
Only toast single slices of bread in
each slot on 2 slice toasters. Make
Bread selections using the Bread
Selector Dial, then press the Toast
Lever down until it latches. The bread
will be lowered into the toaster and
toasting will begin. The toast lever
will not latch if your toaster is not
connected to a working outlet.
3. When toasting has finished, the Toast
Lever will rise and the toasted bread
can be removed. You can lift the Toast
Lever upwards beyond its rest position
to help you remove the toast.
4. If the toast is not done enough it can
be toasted again. Turn the browning
control to a lower setting and keep a
careful eye on the toast to ensure that
it doesn't burn.
5. Toasting can be stopped at any time
by pressing the cancel button.
TOASTING TIPS
• Toasting is a combination of drying
and cooking bread. Moisture levels
differ from one bread type to another
so toasting times may vary. Be sure
to use evenly cut slices of bread to
ensure even toasting.
• For slightly dry bread, use a lower
setting than normal.
NOTES:
• The Auto-Adjusting Bread Guides will automatically center the food for even browning.
• Be sure to check the Bread Selector Dial for desired setting before each use. Having
the correct selection for the food toasted will yield better results.
• To use the Toast Lift, press up on the bread carriage lever to lift food out of the bread
slots. It is a convenient and safe way of retrieving the smallest of toasted items.
TSSTTR2BDS_20EFM1 (Canada).indd 7-8 TSSTTR2BDS_20EFM1 (Canada).indd 7-8
• For fresh bread or whole wheat bread,
use a higher setting than normal.
• Bread which has a very uneven
surface, such as English Muffins or
Waffles, will require a higher setting.
• Thicker cut pieces of bread (including
bagel) will take longer to toast—
sometimes significantly longer. This
is because more moisture must be
evaporated from the bread before
toasting can occur. Very thick pieces of
bread may require two toasting cycles.
• When toasting raisin or other fruit
breads, remove any loose raisins or
fruit from the surface of the bread
before putting it into your toaster.
This will help prevent fruit pieces from
falling into your toaster or sticking to
the guard wires in the toasting slot.
SINGLE SLICE TOASTING
If you are toasting a single slice of bread,
set the browning control to a lower setting
than normal. By using a lower setting
when toasting a single slice of bread, it will
not be over toasted.
IF YOUR TOASTER JAMS
CAUTION! Never use a knife or any
other utensil or implement to remove
jammed bread. Never insert your
fingers into the bread slots.
1. Switch the toaster off and unplug it.
2. Allow the toaster to completely cool
down.
3. Carefully ease the bread out of the
toaster being careful not to damage
the heating element.
5
G E N E R A L I N F O R M AT I O N
Tip:
Your toaster has been designed for optimal toast balance. Some
elements on the inside of the toaster may glow more brightly than others
when in use. This is part of normal toaster operation.
To remove food jammed in the bread slots:
remove the food once the toaster has cooled down.
Do not
place food on top of toaster while it is warming.
WARNING!
Empty the Crumb Tray frequently.
Crumbs will accumulate in the Crumb Tray and could catch fire
if not emptied periodically.
Cleaning Your Toaster
• After use and before cleaning, unplug wall plug and wait for toaster to cool.
• Wipe the outside of toaster with a damp cloth and dry with another cloth or paper
towel. Do not use abrasive cleaners.
CAUTION: Do not immerse in water or any liquid.
• To avoid damage to toaster heating elements, do not use any pointed or sharp articles
for cleaning the inside of the toaster.
• CAUTION: Empty the crumb tray frequently. Crumbs will accumulate in the crumb tray
and could catch fire if not emptied periodically. When the toaster has cooled down
completely, tap the sides of the toaster lightly to dislodge any crumbs caught in the
toaster chamber, remove the crumb tray and empty it. Wipe the tray clean with a damp
cloth or place it in the top rack of your dishwasher for cleaning. Tap sides again to
ensure proper disposal. Return crumb tray back into the toaster before using again.
This appliance has no user serviceable parts. Any servicing beyond that described in the
Cleaning Section should be performed by an Authorized Service Representative only. See
Warranty Section.
unplug the toaster and
6
7/3/20 09:40 7/3/20 09:40