Publicité
Les langues disponibles
Les langues disponibles
Installation
UNDERMOUNT INSTALLATION
PREPARING THE AREA
NOTE:
Undermount sinks are mounted from below the counter. If you
are installing a topmount or "drop-in" sink, please see "topmount
installation" on page 9.
It is highly recommended that undermounting be performed
by a professional installer. Improper installation will void the
warranty. Sink template (1A) shows cut-lines for both undermount
and topmount installations. Review it carefully and follow the
undermount cut-lines only to install the sink under your counter.
- Place the template (1A) on the desired counter space
surface . Keep in mind that the typical setback is
3 1/2 - 4 in . (89 mm - 102 mm) from the front of the
counter to the sink bowl (depending on the cabinet
structure, the counter overhang, the type of sink bowl, and
the deck size).
- Make sure the template (1A) is parallel to the front of the
counter .
1A
Undermount installation
6
CUTTING THE COUNTER
CAUTION: Always wear safety goggles and gloves when
using power tools to prevent personal injury .
- Ensure that the template (1A) is placed so that the sink
will clear all objects and the mounting hardware can be
installed . Secure the template to the counter top using
masking tape .
- Place a support underneath the cut-out portion of the
counter to prevent it from falling during cutting . Use an
appropriate saw to cut along the undermount cutline .
- Drill a 1-3/8 in . (35mm) mounting hole for your faucet .
Tape
Setback
3 1/2 - 4 in.
(89 mm - 102 mm)
Publicité
