SNOWJOE sunjoe 24V-HT18-LTE Manuel De L'opérateur page 4

– before checking, cleaning or working on the product;
– after striking a foreign object;
– whenever the product starts vibrating abnormally.
6. Ensure that the hedge trimmer is correctly located in a
designated working position before starting the motor.
7. While operating the hedge trimmer, always ensure that
the operating position is safe and secure, especially when
using steps or a ladder.
8. Do not operate the hedge trimmer with a damaged or
excessively worn cutting device.
9. Always ensure that all handles and guards are fitted
when using the hedge trimmer. Never attempt to use
an incomplete hedge trimmer or one fitted with an
unauthorized modification.
10. Always use two hands to operate a hedge trimmer fitted
with two handles.
11. Always be aware of your surroundings and stays alert for
possible hazards of which you may not be aware due to
the noise of the product.
12. Take care against injury to feet and hands from the cutting
device.
13. Always ensure that the air vents are kept clear of debris.
14. Wear slip-resistant foot protection and protective clothing
when using this product.
15. Always keep proper footing and operate the product
only when standing on a fixed, secure and level surface.
Change working positions regularly to avoid tiredness and
ensure a comfortable working position at all times.
16. Never use replacement parts or accessories not provided
or recommended by the manufacturer.
17. The use of this product may be restricted by regional or
local regulations.
Vibration + Noise Reduction
To reduce the impact of noise and vibration emission, limit the
time of operation, use low-vibration and low-noise operating
modes as well as wear personal protective equipment.
Take the following points into account to minimise the vibration
and noise exposure risks.
1. Only use the product as intended by its design and these
instructions.
2. Ensure that the product is in good condition and well
maintained.
3. Use correct attachments for the product and ensure they
are in good condition.
4. Keep tight grip on the handles/grip surface.
5. Maintain this product in accordance with these
instructions and keep it well lubricated (where
appropriate).
All manuals and user guides at all-guides.com
6. Plan your work schedule to spread any high vibration tool
Emergency
Familiarize yourself with the use of this product by means of
this instruction manual. Memorize the safety directions and
follow them to the letter. This will help to prevent risks and
hazards.
1. Always be alert when using this product, so that you can
2. Switch off and remove the battery if there are
Residual Risks
Even if you are operating this product in accordance with all
the safety requirements, potential risks of injury and damage
remain. The following dangers can arise in connection with the
structure and design of this product:
1. Health defects resulting from vibration emission if the
2. Injuries and damage to property due to broken cutting
3. Danger of injury and property damage caused by flying
m
field during operation. This field may under some
circumstances interfere with active or passive medical
implants! To reduce the risk of serious or fatal injury,
we recommend persons with medical implants to consult their
doctor and the medical implant manufacturer before operating
this product.
Battery & Charger
Safety Instructions
We pay a great deal of attention to the design of every battery
pack to ensure that we supply you with batteries that are safe,
durable and have a high energy density. The battery cells have
a wide range of safety devices. Each individual cell is initially
formatted and its electrical characteristic curves are recorded.
This data is then used exclusively to be able to assemble the
best possible battery packs.
Despite all the safety precautions, caution must always be
exercised when handling batteries. The following points must
be obeyed at all times to ensure safe use. Safe use can only
be guaranteed if undamaged cells are used. Incorrect handling
of the battery pack can cause cell damage.
4
use across a longer period of time.
recognize and handle risks early. Fast intervention can
prevent serious injury and damage to property.
malfunctions. Have the product checked by a qualified
professional and repaired, if necessary, before you operate
it again.
product is being used over long periods of time or not
adequately handled and properly maintained.
attachments or the sudden impact of hidden objects
during use.
objects.
WARNING!
This product produces an electromagnetic