SNOWJOE sunjoe 24V-HT18-LTE Manuel De L'opérateur page 3

Service
Have your power tool serviced by a qualified repair person
using only identical replacement parts. This will ensure that
the safety of the power tool is maintained.
Additional Safety Rules for Hedge
Trimmer
1. Keep all parts of the body away from the cutter blade.
Do not remove cut material or hold material to be cut
when blades are moving. Make sure the switch is off when
clearing jammed material. Blades coast after turn off.
A moment of inattention while operating the hedge
trimmer may result in serious personal injury.
2. Carry the hedge trimmer by the handle with the cutting
blade stopped. Proper handling of the hedge trimmer will
reduce possible personal injury from the cutter blades.
When transporting or storing the hedge trimmer always fit
the cutting device cover.
3. Hold the power tool by insulated gripping surfaces only,
because the cutter blade may contact hidden wiring or
its own cord. Cutter blades contacting a "live" wire may
make exposed metal parts of the power tool "live" and
could give the operator an electric shock.
m
DANGER!
Keep hands away from blade. Contact with
blade will result in serious personal injury.
4. Remove any blade that has been damaged. Always make
sure that the blade is installed correctly and securely
fastened before each use. Failure to do so can cause
serious injury.
5. Maintain a firm grip on both handles while cutting with the
blade. Keep the blade away from body.
6. Hold hedge trimmer properly, e.g., with both hands if two
handles are provided. Loss of control can cause personal
injury.
7. Check the hedge for foreign objects before operation,
e.g., center fences. Take care that the cutting device does
not come in contact with wire or other metal objects.
8. Service on the product must be performed by qualified
repair personnel only. Service or maintenance performed
by unqualified personnel could result in injury to the user
or damage to the product.
9. Use the hedge trimmer and accessories in accordance
with these instructions, taking into account the working
conditions and the work to be performed. Use of the
power tool for operations different from intended use
could lead to a hazardous situation.
10. Do not touch moving hazardous parts before the battery
pack is removed and the moving hazardous parts have
come to a complete stop.
11. Do not using the machine in bad weather conditions
especially when there is a risk of lightning.
All manuals and user guides at all-guides.com
12. Inspect the area to be cut and remove any foreign objects
Training
1. Read the instructions carefully. Be familiar with the
2. Never allow people unfamiliar with these instructions or
3. Keep in mind that the operator or user is responsible for
Preparation
1. This product can cause serious injuries. Read the
2. Never allow children to use the hedge trimmer.
3. Beware of overhead power lines.
4. Never operate the product while people, especially
5. Dress properly. Do not wear loose clothing or jewelry,
6. Wear eye protection and stout shoes at all times while
7. If the cutting attachment strikes any foreign object or the
Operation
1. Use the product only in daylight or good artificial light.
2. Never operate the product with damaged guards or
3. Keep hands and feet away from the cutting device at all
4. Before using the product and after any impact, check for
5. Always remove the battery
3
that will influence your cutting. If the foreign objects
can not be removed, e.g. wire fences, please mark and
remember it to avoid toughing them during cutting.
controls and the proper use of the product.
children to use the product. Local regulations can restrict
the age of the operator.
accidents or hazards occurring to other people or their
property.
instructions carefully for the correct handling, preparation,
maintenance, starting and stopping of the product.
Become familiar with all controls and the proper use of the
product.
children, or pets are nearby.
which can be caught in moving parts. Use of sturdy
gloves, non-skid footwear and safety glasses is
recommended.
operating the product.
product starts making any unusual noise or vibration,
switch the product off, remove the battery, allow the
product to stop and take the following steps:
– inspect for damage;
– check for, and tighten, any loose parts;
– have any damaged parts replaced or repaired with parts
having equivalent specifications.
shields or without guards or shields in place.
times and especially when switching on the motor.
signs of wear or damage and repair as necessary.
– whenever leaving the product unattended;
– adjusting the working position of the cutting device;
– before clearing a blockage;