Orbis TUO GSM Manuel D'utilisation page 69

TIMER MENU - TIMING SETTING
Set a timing to prolong the current operation for the duration of the timing itself. There
are 3 timings available:
• Timed manual: set a timing during manual operation to maintain this
operation until timing has elapsed.
At the end of the timing, the device activates the automatic operation.
• Timed automatic: set a timing during the automatic operation to maintain this
operation until the timing has elapsed.
At the end of the timing, the device activates the off operation
• Off timed: set a timing during off operation to maintain this operation until timing
has elapsed. At the end of the timing, the device activates automatic or manual
operation, depending on which operation was active before switching off.
How to set a timing
Initial screen
To exit the timing change:
• press the key once to return to the configuration menu
• press the key twice to exit the menu and return to the initial screen
When a timing is in progress, the symbol
Note: to cancel a timing in progress or to exit without activating the timer, set 00'.
Note: the timing ends in the case of changes to the operating mode.
3s
SET
Configuration menu
Set the timing. Increments of:
- 15 minutes (') for timings up to 24 hours
- 1 hour (h) for timings from 1 to 5 days (d)
- 12 hours for timings from 5 to 99 days
is lit.
- 67 -
OB327200 Chronothermostat User Manual
x3 times
TIMER menu