Publicité
Les langues disponibles
Les langues disponibles
INSTALLATION AND INITIAL CONFIGURATION
Device installation
The device can be installed on the wall or to cover the 3-module flush-mounting box
(type 503).
We recommend positioning at a height of 1.5 meters from the floor, in an area that
respects as much as possible the average temperature conditions of the entire
environment. Make sure the area is covered by the GSM signal to guarantee
a stable communication. In this regard, the device allows verifying the intensity of the
signal of each operator (see page 47).
Avoid installation near doors or windows, in niches, behind doors and curtains or
in positions with excess or total lack of ventilation, to avoid that the reading of the
temperature measured by the probe is in some way offset.
1
3
5
2
4
6
1
p u s h -p u s h
- 46 -
OB327200 Chronothermostat User Manual
1
2
click
Publicité
