Redfox RIB 3536 ET Notice D'installation page 8

Technical operating mode
eddy current changes immediately into heat The glass plate itself stays cold. Bul the hot bottom of the
cookware releases its heat to the glass plate and heats it up. This means saving time and energy, becau-
se compared with common cooking plates the cookware is heated up, not the heating element and the
glass plate itself. The heat input promptly adapts the changed settings and can be controlled in small
steps. The induction cooking plate reacts to change settings just as far as a gas stave. The energy reaches
reaction with the basic advantage of highly precise adjustment of the heat consumption.
Suitable cookware
The most important is that the heat conductance of the cooking ware is extremely well, to guarantee a
constant heat distribution. The bottom of the cookware used with the induction plate has to be magnetic
(ferromagnetic). Recommended for use are enamelled pots made of magnetic steel, roasting tins made
lized trade sells suitable cookware. Suitable is all cookware with a spiral symbol graven into its bottom.
Tip: Test with a magnet if the cookware you pian to use is suitable for induction cooking.
ted for use with induction cooking plate.
Advantages of an induction cooking plate
50 %)
Heat is generated in the bottom of the cookware and immediately directed into the food. The power
preset is absorbed immediately into the cookware. This guarantees extremely high cooking speed.
energy consumption up to 30 % .
Precise controlling guarantees quickly and tightly focused heat input.
Basically the cooking area stays cold, only the redirection of heat of the cooking ware warms it up.
As the induction cooking plate is only heated up by the heated cookware, the risk of scorching or
burning in of food residues is reduced. The induction cooking plate does not stay hot as long as stan-
dard cooking plates (easy cleaning).
When the cookware is removed the device switches automatically into the Standby Model
The device detects whether suitable cookware is placed on the cooking plate. lf not, no energy is
transmitted.
the heating function in case of overheating.
Operating of the device
The appliance provides 1 induction cooking plate.
Power levels: 500/ 700 / 900 / 1200 / 1500 / 1800 / 2000 / 2300 / 2700 /3000 /3300 /
3500W
Temperature levels: 60 /80 / 100 / 120 / 140 / 160 / 180 /200 /240 °c
Time presetting: 0- 180 minutes (in 5 minule steps) (will default to 180 if not set)
Tip: When turning on the unit, it will default to temperature level 180.
6
8
-
-