Publicité
STEP 6B
Place the Half-Moon Tray on
top of the Slides, line up the
four (4) set of tray holes
farthest from the cabinet
opening with the slide holes
labeled "C", and attach using
four (4) ¼ – 20x1" Phillips
Machine Screws. Push Screw
Caps into tray holes.
#2
D.
E.
x1
G.
J.
x4
STEP 7
Take the bottom Half-Moon
Shelf Assembly, match it
over the bottom Positioner
Base, and insert the Tray
Shaft through the Support
Bracket, the Half-Moon
Shelf Assembly, and into
the bottom Positioner Base
until the Tray Shaft's bottom
(open end) sits on cabinet
floor. Using a screwdriver,
tighten the lock screws on the
Positioner Base(s). For two-
tier installations, slot the top
Half-Moon Shelf Assembly over
the Tray Shaft. Use the Clear
Bumper Pads to prevent the
Half-Moon Shelf Assembly(s)
from damaging the cabinet
walls.
#2
F.
L.
x1
4
x2
x8
x2
Customer Service: 800-626-1126 | rev-a-shelf.com
Publicité
