Télécharger Imprimer la page

Hilti NURON BX 3-22 Mode D'emploi page 29

Masquer les pouces Voir aussi pour NURON BX 3-22:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 62
▶ Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact
accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid
ejected from the battery may cause irritation or burns.
▶ Do not use a battery pack or tool that is damaged or modified. Damaged or modified batteries may
exhibit unpredictable behaviour resulting in fire, explosion or risk of injury.
▶ Do not expose a battery pack or tool to fire or excessive temperature. Exposure to fire or temperature
above 130° C (265 °F) may cause explosion.
▶ Follow all charging instructions and do not charge the battery pack or tool outside the temperature
range specified in the instructions. Charging improperly or at temperatures outside the specified range
may damage the battery and increase the risk of fire.
Service
▶ Have your power tool serviced by a qualified repair person using only identical replacement parts.
This will ensure that the safety of the power tool is maintained.
▶ Never service damaged battery packs. Service of battery packs should only be performed by the
manufacturer or authorized service providers.
2.2
Tacker safety warnings
▶ Always assume that the tool contains fasteners. Careless handling of the fastening tool can result in
unexpected firing of nails causing personal injury.
▶ Do not point the tool towards yourself or anyone nearby. Unexpected triggering will discharge the
fastener causing an injury.
▶ Do not actuate the tool unless the tool is placed firmly against the workpiece. If the tool is not in
contact with the workpiece, the fastener may be deflected away from your target.
▶ Disconnect the tool from the power source when the fastener jams in the tool. While removing a
jammed fastener, the fastener may be accidentally activated if it is plugged in.
▶ Use caution while removing a jammed fastener. The mechanism may be under compression and the
fastener may be forcefully discharged while attempting to free a jammed condition.
▶ When fastening electrical cables, make sure the cables are not energized. Hold the fastening tool
only by insulated gripping surfaces. Use only fasteners designed for electrical cable installations.
Inspect that the fastener has not damaged the insulation of the electrical cable. A fastener that
damages the insulation of electric cables can lead to electric shock and fire hazards.
2.3
Safety instructions
Requirements to be met by users
▶ Only authorized, appropriately trained persons may operate or service this product.
Personal protective equipment
▶ You and all other persons in the vicinity must wear suitable eye protection, ear protection and a hard hat
while the tool is in use.
Personal safety
▶ Observe the information printed in the operating instructions concerning operation, care and maintenance.
▶ Stay alert, watch what you are doing and use common sense when operating a fastening tool. Do not
use the product when you are tired or under the influence of drugs, alcohol or medication. Take a break if
you experience pain or feel unwell. A moment of inattention while operating the fastening tool can result
in serious injury.
▶ Avoid awkward postures. Make sure you work from a safe stance and stay in balance at all times.
▶ Wear non-skid shoes.
▶ Never pull the fastener guide or fastener back with your hand.
▶ Under certain circumstances, the product could be made ready to fire by pulling the fastener guide
or the fastener back by hand. When the tool is ready to fire, fasteners or the piston could accidentally
be driven into parts of the body.
▶ Keep your arms slightly bent while operating the product (do not straighten your arms).
▶ Keep other people away from the working area, especially children.
▶ Risk of injury by falling tools and/or accessories. Before starting work, check that the battery and installed
accessories are secure.
▶ Keep the air vents clear at all times. Risk of burn injuries due to blocked air vents!
▶ Do not look directly into the light source (LEDs) of the power tool and do not aim the beam at other
persons' faces. Risk of dazzling or eye damage.
*2268212*
2268212
English
23

Publicité

loading

Ce manuel est également adapté pour:

Nuron bx 3-l-22Nuron bx 3-me-22