CLEANING AND MAINTENANCE
3. Pull the inner glass panel from its seat
(in the lower section of the door).
fig. D, D1.
4. Clean the panel with warm water with
some cleaning agent added.
Carry out the same in reverse order to
reassemble the inner glass panel. Its
smooth surface shall be pointed up-
wards.
Important! Do not force the upper
strip in on both sides of the door at
the same time. In order to correctly fit
the top door strip, first put the left end
of the strip on the door and then press
the right end in until you hear a "click".
Then press the left end in until you hear
a "click".
D
1
3
2
1
Removal of the internal glass panel.
3 glass panel.
3
2
D1
Removal of the internal glass panel.
2 glass panel.
109
1
2
2
1