Napoleon Altitude Serie Manuel D'installation page 43

9.6 non-combustible facing material
WARNING
!
Non-combustible facing material must not project more than 4" (101.6mm) from the face of the door (all four
sides). If greater projections are desired, increase the clearance to the sides, bottom and top by 2" (50.8mm) for
every additional 1" (25.4mm) of projection. If using an optional surround, the same rule applies, starting from the
top of the surround. Ensure clearances are maintained for surround removal, as it must lift off the appliance for
maintenance.
A
A
4"
(101.6mm)
2" (50.8mm)
Optional
surround
Section A - A
B
B
6" (152.4mm)
5" (127mm)
3"(76.2mm)
4" (101.6mm)
2" (50.8mm)
Top of
appliance
Door
6" (152.4mm)
5" (127mm)
4" (101.6mm)
0" (0mm)
Section B - B
44.4
finishing
EN
Top of
appliance
Door
43
W415-2015 / B / 03.15.23