Publicité
Les langues disponibles
Les langues disponibles
1
CLEANING OR REPLACING THE FILTER BEHIND THE DUST CONTAINER
1.
Remove the dust container from the vacuum cleaner. There is a filter in front of
the engine.
2.
Remove this filter from the opening and clean it under running water or replace
it if necessary.
3.
Make sure the filter is completely dry before replacing and using the vacuum
cleaner again.
CLEANING OR REPLACING THE HEPA FILTER IN FRONT OF THE AIR OUTLET
1.
At the back of the unit there is a grille for the HEPA filter. You can easily remove it by pushing the
grille cover to the left and removing the grille from the device.
2.
To remove the HEPA filter from the unit, push the cover down.
3.
Clean the filter under running water or replace it if necessary. Make sure the filter is completely dry
before putting it back into the vacuum cleaner and using the unit again.
PLEASE NOTE:
·
The appliance has 3 filters. In a normal cleaning session, it is sufficient to tap out the filters. It is
recommended that you thoroughly clean the filters under tepid running water 3 to 4 times per year.
Make sure that it is completely dry before putting it back in the appliance. You can also replace them if
necessary. Avoid direct sunlight or intense overheating. Never put the filters in the washing appliance
to prevent deformation. Do not use abrasive or cleaning products and wash from the bottom of the
filter.
·
Make sure that all components are correctly assembled before using the vacuum cleaner again.
·
Always use the vacuum cleaner with the filters intact. If you do not do this, you may lose suction force
or damage the motor.
·
Unplug the plug before cleaning the filters.
·
Do not use a hairdryer to dry the filters.
STORAGE
You can easily store the vacuum cleaner by sliding the telescopic tube with floor
nozzle into the storage position. This keeps the tube upright.
28
DO1012S
1
1
2
2
3
A
B
Publicité
