Publicité
Les langues disponibles
Les langues disponibles
PARTS
1.
Handle
2.
On/off button
3.
Button for cord roll-up system
4.
Air outlet with HEPA filter
5.
Storage position
6.
Button to remove the dust reservoir
7.
Dust reservoir
8.
Connector for the hose
9.
Flexible hose
10. Handle for hose with valve
11.
Telescopic tube
12. Sliding button for tube length
13.
Floor nozzle
14. Button to extend/retract brushes
15.
Crevice vacuum cleaner/Duster
16. Button to empty the dust reservoir
17.
Filter dust reservoir
ASSEMBLY
Always unplug the appliance from the socket before removing or connecting parts. Make sure that the
dust reservoir is always in the correct position.
FLEXIBLE HOSE
·
Assembly: Insert the flexible hose coupler into the connection opening
at the front of the vacuum cleaner and tighten.
·
Disassembly: To unlock, unscrew the flexible hose from the connection
opening at the front of the vacuum cleaner.
TELESCOPIC TUBE
1.
Put the handle of the hose into the telescopic tube.
2.
Set the telescopic tube to the desired length. To do this, push the slide button forward and pull out
the bottom part of the tube to make it longer. Release the slide button and let the tube snap into
place.
3.
Attach the floor nozzle to the telescopic tube by firmly sliding the tube into the nozzle.
26
DO1012S
2
3
5
4
10
12
11
13
14
17
15
9
1 6
8
7
16
Publicité
