Introduction; General; Use; Maintenance - ETNA EKR500CR Mode D'emploi

INTRODUCTION

General

Use

Maintenance

Disposal
GB 4
These instructions for use contain information about the installation,
safety, operation and maintenance of the mixer tap.
The installation instructions are for the installer, who will install the
mixer tap safely for you.
By reading the other information, you will quickly learn about all the
mixer tap's features.
Please keep this booklet. Any future user of this mixer tap will find it
very useful.
Check the tap for damage or scratches before using for the
first time. Inform your supplier of damage or scratches within
eight days of delivery. The maximum temperature of the water must not
be higher than 90 °C.
The recommended maximum water temperature is 65 °C.
Clean the tap every day with a soft cloth. Use soapy water for a more
thorough clean. Remove stubborn dirt or scale with vinegar. Next, rinse
the tap with plenty of water and then dry it well with a dry cloth.
Attention
Abrasive cleaners can cause scratches! Never use abrasive cleaners
or aggressive chemical cleaners to clean the mixer tap. The jet bracker
in the outlet can become blocked with scaleafter a while. Remove the
filter and soak it in vinegar until the scale has dissolved.

Disposal of packaging and appliance

Please dispose these materials in a responsible way in accordance
with the regulations of your local authority. Your local authority will also
be able to give you information about disposing of disused household
appliances in a responsible way.
The packaging of the appliance is recyclable. It is made of:
• cardboard