Poolex UConnect Guide D'installation page 12

Installation
STEP 4
Place the waterproofing seals at the end of each connec-
C
C
tor , then screw them to the body of the connector .
A F
A
F
STEP 5
Place the waterproofing seals on the large side of the
D
adaptors , then screw these adaptors on the entrance
B
and the exit of your heat pump. (According to the heat
pump, you may need an additional adaptor.)
D
B
STEP 6
Then place the waterproofing seals at the end of the
C
pipes , then connect them to the heat pump, making
A
sure not to reverse the water entrance and exit.
C
A
EN