Publicité
Les langues disponibles
Les langues disponibles
Installation
STEP 1
Installation of the fixation device:
Place the metallic plate
H
under the Poolex UConnect
body
F
with the 3 supplied screws.
H
F
STEP 2
Place the Poolex UConnect
F
on the side of your swim-
F
ming pool. The bottom part must be immersed up to the
delivery nozzle. Make sure to be at least 4 yards away from
your heat pump.
STEP 3
For better stability, the Poolex Uconnect may be attached
to the side of your pool with 2 screws placed on each side
of the upper part.
EN
Publicité
