Pressalit Care R8684 Manuel D'utilisation Et D'entretien page 14

Maintenance
Expected service life of the changing table is 8 years, provided that
maintenance is carried out as described below:
It is recommended on a weekly basis to run the motors on the product to their
maximum positions by raising the product to its full height, and then lowering
it to its lowest position, so that the internal parts are lubricated.
It is recommended that service inspection is done once a year.
Service inspection
Take the changing table to its highest position.
1
en
1
14
Disconnect mains before
removing the covers.
① Remove the four screws
1
holding the front cover.
1
1