Pressalit Care R8684 Manuel D'utilisation Et D'entretien page 12

Operating instructions
The changing table can be adjusted from 300 to 1000 mm / 11.81 to 39.37
inches up and down. Max load is 75 kg / 165 lbs.
Safety tray
If the safety tray
lowered, the motor stops immediately and the table will rise 3-4 cm to reduce
the risk of pinching/compression injuries under the table. The table can be
used again as soon as the obstruction has been removed.
en
12
Take care to
avoid injury to
hands when in the
vicinity of moving
mechanical parts.
comes into contact with an object when the table is being
1
Height adjustment
The height adjustment is controlled by the wired hand
control unit.
Press and hold the Up button to raise the changing table
lifter, and press and hold the Down button to lower the
table. When the button is released, the motion stops.
CAUTION
!
Never place objects underneath
the changing table.
1