Tunturi Cardio Fit T40 Manuel De L'utilisateur page 20

English
Press "SPEED +/-" buttons to select:10~99
press "MODE" button to confirm.
- The "Calories" display shows "F3" (Heigth) .
The "Pulse"display shows "170"cm
Press "SPEED +/-" buttons to select:100~220
cm
press "MODE" button to confirm.
- The "Calories" display shows "F4" (Weigth) .
The "Pulse" display shows "70"kg
Press "SPEED +/-" buttons to select: 20~150 kg
press "MODE" button to confirm.
- The "Calories" display shows "F5" (Active)
The "Pulse" display shows "- - - -" (Measure)
CAUTION
• Holding the contact hand-grip heart rate
measurement pads is required for this
function.
Result calculation:
- BODY TYPE: ( Body Fat ratio; 9 types)
• FAT 0 ~19
• FAT 20 ~ 25
• FAT 26 ~ 29
• FAT 30 ~ +
- BF = Body Fat ( in ratio % )
- Error code "ER" will show if no heart rate was
detected during the BF measurement process.
- Press "MODE" button to leave Body Fat
program.
User programs (U-01~U-03)
The equipment has 3 user programs.
Each user program can be adjusted to personal
requirements.
Each user program has a maximum of 12 steps.
The speed and the incline can be set for each
step.
Each steps takes 1/12 of the total amount of time.
- Press "MODE" button to open programming
mode.
- Press "PROG" buttons to select "U-01~U-03"
program, press "MODE" button to confirm.
- Press "SPEED +/-" buttons to set your desired
training time
Default training time is set on 30:00 minutes.
Range 10:00~99:00 min.
The "Distance" display shows "01".
- Press the "SPEED +/-" buttons to set the
speed. Press the "INCLINE +/-" buttons to
set the incline. Press the "MODE" button to
confirm.
20
Underweight
Standard
Overweight
Obesity
The main display shows "SE02"
- Repeat the above action to configure the other
steps.
- Press the "START" button to start the program.
Warranty
Warranty terms
The consumer is entitled to the applicable legal
rights stated in the national legislation concerning
the commerce of consumer goods. This warranty
does not restrict these rights. The Purchaser's
Warranty is only valid if the item is used in an
environment approved by Tunturi New Fitness BV
for that particular equipment. The product-specific
approved environment is stated in the Owner's
Manual provided with your equipment.
Warranty conditions
The warranty conditions commence from the date
of purchase. Warranty conditions may vary per
country, so please consult your local dealer for the
warranty conditions.
Warranty coverage
Under no circumstances shall Tunturi New Fitness
BV or the Tunturi Distributor be liable by virtue of
this warranty or otherwise for any special, indirect,
secondary or consequential damages of any
nature arising out of any use or inability to use this
equipment.
Warranty limitations
This warranty covers manufacturing defects in the
fitness equipment as originally packed by Tunturi
New Fitness BV. The warranty shall apply only
under conditions of normal, recommended use of
the product as described in the Owner's Manual
and providing that Tunturi New Fitness BV's
instructions for installation, maintenance and use
have been complied with. Neither Tunturi New
Fitness BV's nor the Tunturi Distributors'
obligations apply to defects due to reasons
beyond their control. The warranty applies
only to the original purchaser and is valid only
in countries where Tunturi New Fitness BV has
an authorised importer. The warranty does not
extend to fitness equipment or components
that have been modified without the consent of
Tunturi New Fitness BV. Defects resulting from
normal wear, misuse, abuse, corrosion, or damage
incurred during loading or transportation are not
covered.