Publicité
Les langues disponibles
Les langues disponibles
Introduction
WARNING:
start during transport pull up the safety
key, remove the battery and wait at least 5
seconds.
Transportation
•
The Dangerous Goods Legislation requirements
apply to the contained Li-ion batteries.
•
For commercial transports special requirements on
package and labels must be obeyed.
•
Make sure that you obey the regulations for
dangerous material when you prepare the product
for transport. Local regulations can apply.
•
Always remove the battery for transport.
•
Put tape on the battery connectors and make
sure that the battery cannot move around during
transport.
•
Attach the product during transport.
Storage
•
Always remove the batteries for storage.
•
Let the product become cool before storage.
•
To prevent accidents, make sure that the battery is
not connected to the product during storage.
•
Keep the battery charger in a closed and dry space.
•
Keep the battery and the battery charger in a dry
space where there is no moisture or frost.
•
Disconnect the battery from the battery charger
during storage.
•
Do not keep the battery where static electricity can
occur. Do not keep the battery in a metal box.
Cutting motor
Motor type
Motor speed – SavE, rpm*
Motor speed – Nominal, rpm*
Motor speed – High load, rpm*
Motor output – max. kW
Motor output – Nominal, kW
Weight
22
Transportation, storage and disposal
To prevent unintentional
Technical data
•
Keep the product where the ambient temperature is
between -10°C and 40°C.
•
Keep the battery where the temperature is between
5°C and 25°C and out of sunlight.
•
Keep the battery charger where the temperature is
between 5°C and 45°C and out of sunlight.
•
Make sure that the battery is charged to 30% - 50%
before you put it in storage for long periods.
•
Keep the product, battery and battery charger in
a locked area out of reach for children and not
approved persons.
•
Clean the product and do a complete servicing
before you put the product in storage for a long time.
•
Do the maintenance procedures given in this
operator's manual. Refer to
on page 19 .
•
Do a complete servicing before long time storage.
Disposal
Symbols on the product or the packaging of the product
indicate that this product cannot be handled as domestic
waste. It must be submitted to an appropriate recycling
station for the recovery of electrical and electronic
equipment.
By ensuring that this product is taken care of correctly,
you can help to counteract the potential negative impact
on the environment and people that can otherwise
result through the incorrect waste management of this
product. For more detailed information about recycling
this product, contact your municipality, your domestic
waste service or the shop from where you purchased
the product.
(Fig. 46)
LB 442i
BLDC (brushless) 36V
2600
3000
3500
1.8
1.2
Maintenance schedule
LB 448i
BLDC (brushless) 36V
2600
3000
3500
1.8
1.2
1520 - 005 - 21.08.2023
Publicité
