Volpi OLYTECH mondial 755SP Manuel D'utilisation Et De Maintenance page 39

The machine has three different working speeds, selectable using the X button (to increase speed) and L
button (to reduce the speed), positioned on the handle.
At first switching on, the machine will start at speed 1 (the lowest), then changeable as described above.
If the machine is switched off without disconnecting the battery, next time you switch it on it will start at
the last selected speed.
If the battery is disconnected, next time you switch the machine on, it will start at speed 1 (lowest).
Press the button Z on the handle in order to switch the machine off.
Use only 12V batteries. Do not use the machine with low battery.Outside temperature
between +1°C and +40°C.
Codes 845SP-L-XL Ref. fig. C.2
Link the connector positioned at the bottom of the pole -D- to the connector -E- positioned at the end of
the extension cable -S- and screw it.
Insert the other connector -F- of the long cable S into the socket -G- on the electronic converter -B-.
Connect the electronic converter -B- to the battery,12-24V, through the 2 nippers, the red one on the
positive (+) and the black one on the negative (-).
The battery, not provided, must never be connected to the battery charger while used.
Press the Z button on the handle in order to switch the machine on. The red led on the handle lights up
and stays on until the machine is turned off.
The machine has three different working speeds, selectable using the X button (to increase speed) and L
button (to reduce the speed), positioned on the handle.
At first switching on, the machine will start at speed 1 (the lowest), then changeable as described above.
If the machine is switched off without disconnecting the battery, next time you switch it on it will start at
the last selected speed.
If the battery is disconnected, next time you switch the machine on, it will start at speed 1 (lowest).
Press the button Z on the handle in order to switch the machine off.
Use only 12V batteries. Do not use the machine with low battery. Outside temperature
between +1°C and +40°C.
Codes 855SP-L-XL Ref. fig. C.3
Link the connector positioned at the bottom of the pole -D- to the connector -E- positioned at the end of
the extension cable -S- and screw it.
Insert the other connector -E- of the cable S into the socket G of the battery H.
Switch on the battery with the J switch.
The battery must never be connected to the charger while used.
Press the button Z on the handle to switch the machine ON. The red led on the handle lights up and
stays on until the machines is turned off.
The machine has three different working speeds, selectable using the X button (to increase speed) and L
button (to reduce the speed), positioned on the handle.
At first switching on, the machine will start at speed 1 (the lowest), then changeable as described above.
If the machine is switched off without disconnecting the battery, next time you switch it on it will start at
the last selected speed.
If the battery is disconnected, next time you switch the machine on, it will start at speed 1 (lowest).
Press the button Z on the handle in order to switch the machine off.
Volpi Lithium battery characteristics: nominal voltage 43,2V – Capacity 11,6Ah.
Outside temperature between +1°C and +40°C.
Davide e Luigi Volpi S.p.A.
COMPANY WITH QUALITY SYSTEM
39
Via San Rocco, 10 – 46040 Casalromano (MN) – Italia
MANAGEMENT CERTIFIED BY ICIM
Tel. +39 0376 76009 Fax +39 0376 76408 www.volpioriginale.it
= ISO 9001 =