6.3.1 Manual programming
For manual programming, you have to enter the corresponding TV code directly.
Depending on the brand of your TV set, you may have to try several TV codes
before you find the right one. A list of all supported devices is provided at
www.ocilion.com/gebrauchsanleitungen. If you know the TV code for your TV
set, this is the fastest programming method.
1. Switch on your TV set
2. Press and hold the
The red LED is lit.
3. Enter the 3-digit code according to the TV code list.
If the TV code is valid, the red LED flashes twice in quick succession.
4. Press and hold the
If the TV set is switched off, the TV code is correct.
If the TV set does not respond to the command, complete steps 2 through
4 using other codes from the TV code list until the TV set turns off.
5. Switch the TV set on again and repeat step 4 to try other buttons, checking
whether they work correctly.
and
buttons at the same time for at least 3 seconds.
button and then press
.
P510E IP | 17