Ocilion IPTV Technologies P510E IP Manuel D'utilisation page 41

5.5.3 Disconnecting the WiFi connection
To disconnect the WiFi connection, navigate in the setup menu to Disconnecting
the WiFi connection. Then you can do the following:
Connect the set-top box to a different WiFi network: Proceed as described in
section "Establishing a WiFi connection" on page 9.
Establish the network connection using a network cable: Connect the network
cable included in the package contents as described in section "Cable connec-
tions" on page 7.
5.6 Software updates
Software updates are installed automatically. If a software update is already
available when you first start using the product, you have to install the software
update first. To do so, follow the instructions on the TV set.
6 Remote control
The remote control has an automatic power saving mode to increase the battery
life. Power saving mode has ended when the green LED flashes twice in quick
succession.
The remote control can be used in Bluetooth or infrared mode. You can also
program in a TV set. This allows you to control the set-top box and your TV set
with the remote control. To change the operating mode (Bluetooth or infrared),
see section "Changing the operating mode" on page 16.
P510E IP | 13