Ocilion IPTV Technologies P510E IP Manuel D'utilisation page 35

The set-top box requires an active internet connection to connect with
an IPTV system. Use either a network cable or WiFi to establish the
connection. Please note, however, that if you connect to WiFi and other
devices simultaneously use this internet connection, the bandwidth may
be limited. This can cause issues with playback or interruptions.
5.1 Inserting the batteries into the remote control
1. Insert the batteries into the remote control (see Figure 2 on page 7). To
do so, press down the battery cover at the mark and slide it back
the battery compartment.
2. Place the batteries in the battery compartment
correct (see markings on the bottom of the battery compartment).
3. Insert the lug of the cover into the opening
and push the battery compartment cover forward
into place.
Figure 2: Inserting the batteries
5.2 Cable connections
1. Connect the set-top box as shown in Figure 3 on page 8. Observe the
correct connection sequence:
HDMI cable
®
Network cable
Power supply
2. Turn on your TV set.
, making sure the polarity is
on the battery compartment
until it audibly latches
, to open
P510E IP | 7