Revox EVOLUTION Mode D'emploi page 38

evolution
REVOX®
Programming functions
¢ Press the cd(17) and more (8) keys. Then press the
program (4) key. The following menu is displayed:
D a
1] #8 clear track 04
mms) >) recall
L 4
step 03
exit =f) c
[SAO
vol
The following programming facilities can be combined
with the repeat and shuffle functions described in the
Section "Special functions".
Selecting and storing a track
Activate the programming menu: Press cd (17), more (8)
followed by program (4).
e With the next (6) or prev (2) key select the first
track to be played.
e Press the store (5) key to store the selected track.
The track number is displayed in the corresponding
field of the 4x5 matrix and below it the next
program step number is shown. Up to 20 tracks
can beprogrammed in this way. The same track can
be stored several times in different program steps.
Deleting tracks from the contents list
Activate the programming menu: Press cd (17) and more
(8), followed by program (4).
* Press the recall (3) key.
* Press next (6) or prev (2) to select the track to be
deleted.
* Press cancel (4). The contents list of the CD is
displayed and the selected track is deleted.
¢ Additional tracks can be selected with the next (6)
or prev (2) key and deleted with the cancel (4) key.
Deleting tracks from a program
¢ After a program has been entered you can recall
and check the sequence of the program by pressing
the recall (3) key. The program step is displayed
below and the stored track above the 4x5 matrix.
e During the recall procedure a track can be deleted
by pressing the cancel (4) key. The subsequent
program steps are shifted down by | position.
This step can be repeated as often as desired.
Deleting the program
« The complete program can be deleted by pressing
the clear (1) key.
Starting the program
¢ Press the exit (8) key. The display changes from the
programming menu to the operating menu. The
presence of the program is confirmed by the
wording PRG next to the logo.
e Press the play key to start the program.