Publicité
Les langues disponibles
Les langues disponibles
Suitable cooking equipment
GB
Suitable
Bottom of
Flat bottom
cookware
(Fig.2 on page 3)
Material
Cookware with iron,
cast iron, magnetic
stainless steel or
enamelled iron bottom.
Diameter of
Between 12 cm and
the bottom
22 cm.
Type of
Cookware with a
cookware
bottom thickness over
1.5 mm.
Note: Using a pan or pot that's not suitable for induction cook-
ing may damage the appliance.
Cleaning & maintenance
• ATTENTION! Always disconnect the appliance from the pow-
er supply and cool down before storage, cleaning & mainte-
nance.
• Do not use water jet or steam cleaner for cleaning and do not
push the appliance under the water as the parts will get wet
and electric shock might be resulted.
• If the appliance is not kept in a good state of cleanliness, this
can adversely affect the life of the appliance and result in a
dangerous situation.
• Food residues should be regularly cleaned and removed from
the appliance. If the appliance is not cleaned properly, it will
reduce its lifespan and may result in a dangerous condition
during use.
Cleaning
• Clean the cooled exterior surface with a cloth or sponge
slightly dampened with a mild soap solution.
• For reasons of hygiene, the appliance should be cleaned be-
fore and after use.
• Avoid water contacting the electrical components.
• Never immerse the appliance in water or other liquids.
• Never use aggressive cleaning agents, abrasive sponges, or
cleaning agents containing chlorine. Do not use steel wool,
metallic utensils, or any sharp or pointed objects for cleaning.
Do not use petrol or solvents!
Maintenance
• Check the operation of the appliance regularly to prevent se-
rious accidents.
• If you see that the appliance is not working properly or that
there is a problem, stop using it, switch it off and contact the
supplier.
• All maintenance, installation and repair work must be car-
ried out by specialised and authorised technicians, or recom-
mended by the manufacturer.
Transportation and Storage
• Before storage, always make sure that the appliance has
been disconnected from the power supply and completely
cooled down.
• Store the appliance in a cool, clean and dry place.
8
• Never place heavy objects on the appliance as this could
Not suitable
• Do not move the appliance while it is under operation. Dis-
Curved, uneven,
rounded bottom
(Fig.3 on page 3)
Troubleshooting
Cookware with ce-
ramic, glass, copper,
If the appliance does not function properly, please check the
bronze, or aluminium
below table for the solution. If you are still unable to solve the
bottom.
problem, please contact the supplier/service provider.
Less than 12 cm or
more than 22 cm.
Completely closed
containers or cans.
Error code identification
Warranty
Any defect affecting the functionality of the appliance which
becomes apparent within one year after purchase will be re-
paired by free repair or replacement provided the appliance has
been used and maintained in accordance with the instructions
and has not been abused or misused in any way. Your statutory
rights are not affected. If the appliance is claimed under war-
ranty, state where and when it was purchased and include proof
of purchase (e.g. receipt).
In line with our policy of continuous product development we
reserve the right to change the product, packaging and docu-
mentation specifications without notice.
damage it.
connect the appliance from power supply when moving and
hold it at the bottom.
Problems
Possible cause
The appliance
- Power plug is not
does not switch
connected properly
ON.
with the electrical
outlet.
- On/Standby button
is not pressed.
Cooling fan
- This is normal.
is operating
The cooling fan
even after the
continues running
appliance is
in Standby mode for
switched to
some time to cool
Standby mode.
down all internal
elements.
Error
Possible cause
codes
E 1
The temperature of the
appliance is too high
Cooling fan defective
E 2
The pan or pot is
overheated.
Possibly, the pan
becomes empty and
appliance will shut
down for protection.
E 3
The supply voltage
is abnormal. (Supply
voltage is too high or
too low)
Possible solution
- Check the power
plug to make sure
it is connected
properly.
- Press the On/
Standby button to
start operation.
- Wait until the
cooling fan stops
rotating.
Possible solution
Clear all obstacles that
around the appliance.
Unplug the appliance,
remove the pan or pot,
wait until the appliance
is completely cool down.
Contact the supplier.
Unplug the appliance,
remove the pan or pot,
wait until the appliance
is completely cool down.
And make sure water is
inside the pan.
Make sure that the
appliance is connected
to a suitable electrical
power supply.
Publicité
