EINHELL GC-CG 3,6/70 Li WT Instructions D'origine page 15

•
Original operating instructions
•
Safety instructions
3. Proper use
Grass shears (Fig. 1):
The equipment is designed for cutting the edges
of lawns and small areas of grass in private and
hobby gardens.
Shrub shears (Fig. 1a):
The equipment is designed for cutting small
hedges and shrubs in private and hobby gardens.
Equipment designed for use in private and hobby
gardens is regarded as unsuitable for use in pub-
lic facilities, parks and sports centers, along road-
ways, or in agriculture and forestry. The operating
instructions as supplied by the manufacturer must
be obeyed to ensure that the equipment is used
properly.
Warning! This equipment must not be used
for composting purposes (shredding) as this
could result in injury or damage to property.
The machine is to be used only for its prescribed
purpose. Any other use is deemed to be a case
of misuse. The user / operator and not the manu-
facturer will be liable for any damage or injuries of
any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
4. Technical data
Voltage ................................................... 3.6 V DC
Protection .....................................................IPX1
Protection class .................................................III
Speed n₀ .............................................. 1200 rpm
Cutting width grass shears ....................... 70 mm
Cutting length shrub shears ................... 110 mm
Cutting thickness shrub shears .................. 8 mm
Sound pressure level L
Sound power level L
WA
Uncertainty K .............................................. 3 dB
................................. ≤ 2.5 m/s²
Vibration max. a
h
Uncertainty K ......................................... 1.5 m/s²
Anl_GC_CG_3_6-70_Li_WT_SPK13.indb 15 Anl_GC_CG_3_6-70_Li_WT_SPK13.indb 15
....................... 61 dB(A)
A
P
.......................... 81 dB (A)
- 15 -
GB
Weight ....................................................... 0.6 kg
Sound pressure level
at the operator's ear ............................. 77 dB (A)
Uncertainty K ............................................... 3 dB
Lithium-ion battery
Voltage ................................................... 3.6 V DC
Capacity .................................................... 2.0 Ah
Number of cells ................................................. 1
Charger
Input voltage ..................... 100-240 V ~ 50/60 Hz
Protection class ..........................................
Output
Rated voltage ........................................... 5 V DC
Rated current .............................................. 0.5 A
The stated vibration emission levels and stated
noise emission values were measured in ac-
cordance with a set of standardized criteria and
can be used to compare one power tool with
another.
The stated vibration emission levels and stated
noise emission values can also be used to make
an initial assessment of exposure.
Warning:
The vibration and noise emission levels may vary
from the level specifi ed during actual use, depen-
ding on the way in which the power tool is used,
especially the type of workpiece it is used for.
Limit the operating time!
All stages of the operating cycle must be conside-
red (for example, times in which the electric tools
are switched off and times in which the tool is
switched on but operates without load).
Keep the noise emissions and vibrations to a
minimum.
•
Only use appliances which are in perfect wor-
king order.
•
Service and clean the appliance regularly.
•
Adapt your working style to suit the appliance.
•
Do not overload the appliance.
•
Have the appliance serviced whenever ne-
cessary.
•
Switch the appliance off when it is not in use.
•
Wear protective gloves.
/ II
21.06.2022 09:20:00 21.06.2022 09:20:00