Télécharger Imprimer la page

JVC DLA-X70R Manuel D'instructions page 69

Masquer les pouces Voir aussi pour DLA-X70R:

Publicité

Les langues disponibles

Les langues disponibles

Adjustments and settings in the menu (continued)
See Pixel Adjust Flow and Operation: Adjust(Fine)
After making overall adjustment for error across the entire screen, proceed to fine-tuning. Press the [COLOR
TEMP] button on the remote control to display the [Adjust(Fine) Window]. Also, from the main menu, set the
[Adjust Area] to [All] and select [Adjust Color] and [Adjust Pattern], then move the cursor to [Adjust (Fine)]
and press the [OK] button on the remote control to display the adjust pattern and the fine tune window.
(*) The range of adjustment may narrow depending on the adjust amount of the entire screen.
Adjust(Fine) window
You can use the [UP], [DOWN],
[LEFT], and [RIGHT] buttons to
change position.
Press the [OK] button on the remote control to enter the adjust operation mode. Use the [UP], [DOWN],
[LEFT], and [RIGHT] buttons to move and adjust pixels in the vertical and horizontal directions across the
entire screen. The adjustment settings appear in the center of the Adjust (Fine) window. Use the [BACK]
button to exit the adjust operation mode.
Pixel adjust setting
Remote Control
Operation Guide
(Reference page: 68)
This shows the maximum and minimum
overall screen error.(Max)/(Min)
When both H (horizontal direction) and V (vertical direction) show a maximum overall screen error of 31,
even if the adjust setting is less than this, you may not configure an adjustment setting that is larger than the
displayed setting. Furthermore, when the minimum overall screen error is -31, even if the adjust setting is
greater than this, you may not configure an adjustment setting that is larger than the displayed setting.
Pixel Adjust
Whole Adjust (Fine)
Red
H
-1 (-20/-20)
V
1 (  5 / 5 )
Select
Color P.
A. Area
Color A.
ADJUST.
PIC.
COLOR.
COLOR.
GAMMA
Operate
TEMP
P.FILE.
ADJ.
Adjust(Fine) window
Pixel Adjust
Pixel Adjust
Adjust(Fine)
Whole Adjust (Fine)
H
H
-1 (-20/-20)
-1 (-20/-20)
V
V
1 (  5 / 5 )
1 (  5 / 5 )
Color P.
Color P.
A. Area
A. Area
ADJUST.
ADJUST.
Color A.
Color A.
COLOR.
COLOR.
COLOR.
COLOR.
GAMMA
GAMMA
TEMP
TEMP
P.FILE.
P.FILE.
Adjust setting
Adjust Pattern
BACK
BACK
H (Horizontal)
Red
Red
Select
Select
BACK
BACK
PIC.
PIC.
BACK
BACK
Operate
Operate
ADJ.
ADJ.
ENGLISH
Adjust Color
69

Publicité

loading

Ce manuel est également adapté pour:

Dla-x90rDla-x30