Heitronic 37260 Instructions D'installation Et D'utilisation page 4

. Malfunctions
Luminaire does not switch on

Light switched on at the switch?

Check the connected lines
. Change lamps:

The use of lamps from other manufacturers can lead to overheating.

Before changing the lamp, disconnect the power supply.

If the lamp is changed immediately after the lamp has failed, you must first allow the fixture to cool down
sufficiently long.

Remove the protective glass. Carefully twist the defective lamp out of the socket. Carefully screw the
new lamp into the socket. Do not use force or too much pressure.

Before putting the lamp into operation, check that it is properly seated in the socket. Refit the protective
glass.
. Technical data
Article Connection
37260
230 V AC, 50 Hz
37261
. Care

First disconnect the entire product from the power supply and allow it to cool down before carrying out
any
cleaning or maintenance work on the product.

Clean the product regularly - only with a slightly damp, soft and lint-free cloth.
. Disposal

Waste electronic equipment must be taken to public collection points and must not be disposed of as
household waste.
LDBS Lichtdienst GmbH ǀ Chemnitzer Straße 8 ǀ 14612 Falkensee ǀ www.HEITRONIC.de
LED
E27, LED 9 W max
Protection Protection
type class
IP 44 I
4 / 20 08/23