Delete All Scenes - afx light W-DMX192 Manuel D'utilisation

Copy a scene
1.
Press and hold the PROGRAM button until the LED blinks
2.
Use BANK UP/DOWN buttons to navigate to the bank containing the Scene to be copied
3.
Press the SCENE button that corresponds to the scene to be copied
4.
Press the MIDI/ADD button to copy the scene
5.
Use BANK UP/DOWN buttons to navigate to the bank that the Scene is to be copied into
6.
Press the SCENE button where the Scene is to be copied into. All LEDs will blink to confirm
Delete a scene
1.
Press and hold the PROGRAM button until the LED blinks
2.
Use BANK UP/DOWN buttons to navigate to the bank containing the Scene to be deleted
3.
Press and hold the AUTO/DEL button
4.
Press the SCENE button that corresponds to the scene to be deleted. All LEDs will blink to
confirm
Note: When deleting a scene the physical location is not removed, however, all 192 DMX channels
available to the scene will be set to value 0

Delete all scenes

1. Press and hold the PROGRAM and BANK DOWN buttons whilst switching the power off
2. Turn the FIXTURE back on and all Scenes will be deleted
Caution: This process is irreversible. All scenes with data will be set to 0.
Playback in sound mode
1.
Press and hold the MUSIC BANK COPY button until the MUSIC LED is lit
2.
Use BANK UP/DOWN buttons to navigate to the bank which is to be run in Sound mode
3.
Alternatively, you can press a single CHASE button or several CHASE buttons in
sequence and all Chases will be run in the order selected
4.
You can adjust duration time using the FADE TIME fader
Note: In Sound mode, programs will be triggered by the sound using its built-in microphone.
Multiple chases selected will loop and run in the order originally selected.
Playback in auto mode
1. Press and hold the AUTO/DEL button until the AUTO LED is lit
2. If a CHASE button is not pressed, the fixture will automatically run a BANK program
3. Use BANK UP/DOWN buttons to navigate to the bank which is to be run in Auto mode
4. Alternatively, you can press a single CHASE button or several CHASE buttons in
sequence and all Chases will be run in the order selected
5. You can adjust time between steps using the SPEED fader and duration of the step using the
FADE TIME fader
Blackout
1.
Press the BLACKOUT button to set all DMX values temporarily to 0