Copy A Program; Create A Chase; Running A Chase - afx light W-DMX192 Manuel D'utilisation

Edit a program
Scenes will need to be modified manually
1.
Press and hold the PROGRAM button until the LED blinks
2.
Use BANK UP/DOWN buttons to change Program banks if necessary
3.
Select the desired fixture via the FIXTURES button
4.
Move faders to adjust parameters to the required setting for the fixture(s)
5.
Press the MIDI/ADD button to prepare the save
6.
Select a SCENE to store the scene

Copy a program

1. Press and hold the PROGRAM button until the LED blinks
2. Use BANK UP/DOWN buttons to change Program bank to be copied
3. Press the MIDI/ADD button to prepare the copy
4. Use BANK UP/DOWN buttons to change the destination Program bank
5. Press the MUSIC BANK COPY button to copy to the new destination.
All LEDs will blink to confirm

Create a chase

A chase is created by using previously created scenes. Scenes become steps in a chase and can be
arranged in any order you choose. It is highly recommended that prior to programming chases for the
first time; you delete all chases from memory. See Delete All Chases for instructions. A Chase can
contain 240 scenes as steps. The term steps and scenes are used interchangeably.
1. Press and hold the PROGRAM button until the LED blinks
2. Press the CHASE (1-6) button you wish to program
3. Change BANK if necessary to locate a scene
4. Select a SCENE to insert
5. Press the MIDI/ADD button to store
6 . R e p e a t ste p s 3 ~ 5 to a dd a d d itio n a l s te p s in th e c h a se .
U p to 2 4 0 s te p s ca n b e re c o rd e d .
7. Hold the PROGRAM button to save the chase

Running a chase

1. Press a CHASE button then press the AUTO DEL button.
2. Adjust the Chase speed by tapping the TAP DISPLAY button twice at a rate of your choosing
Note: The time between 2 taps will set the chase speed (up to 10 minutes )
Check a chase
1. Press and hold the PROGRAM button until the LED blinks
2. Select the desired CHASE button
3. Press the TAP/DISPLAY button to switch the display to step view
4. Use BANK UP/DOWN buttons to review each scene in the chase
Edit a chase ( copy a bank to a chase )
1. Press and hold the PROGRAM button until the LED blinks
2. Select the desired CHASE button
3. Press MUSIC/BANK COPY button to prepare the copy
4. Press MIDI/ADD button to copy. All LEDs will blink to confirm