Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
DESCRIPTION
1) Scanner buttons
12 scanners of 16 DMX channels
SCANNERS
1
2
3
4
5
6
7
8
9
10
11
12
Press the button of the desired projector, the corresponding led is lit and the channels of this projector
can be adjusted. Press once again to unselect the device (the fader becomes inactive and the
corresponding led turns off).
2) Faders
These potentiometers are used to control the intensity of channels 1 to 8 for the selected scanner.
Use the A - B button to select channels 7 to 16.
3) Page select button
Press the Page A button to choose either the page has (fader 1 to 8), either the page B (fader 9 to
4) Chase buttons ( 1-6 )
Use one of these buttons to select a programmed sequence
5) Blackout button
Use this button to force output to 0%. Press again to restore the normal level of each fader
6) Tapsync display button
In playback mode, a speed can be saved by pressing a few times this button at the desired rate.
In program mode, use this button to change the format of the display.
7) Music / Bank copy button
To activate the music mode, to create scenes and to program sequences.
DMX CHANNEL
1-16
17-32
33-48
49-64
65-80
81-96
97-112
113-128
129-144
145-160
161-176
177-192
16)
Publicité
Table des Matières
