Publicité
Les langues disponibles
Les langues disponibles
TOUBLESHOOTING
PROBLEM
The motor does not start.
The product does not reach
high pressure.
POSSIBLE CAUSE
The power button is in the
"0FF"(0) position.
The power cord is not plugged
in.
Electrical outlet does not supply
sufficient power.
The circuit breaker is tripped.
The power switch is on, but
you do not pull the spray gun
trigger.
The diameter of garden hose is
too small.
The water supply is restricted.
The water supply is not
sufficient.
Spray tip has not be installed
onto the spray wand properly.
The water intake filter is
clogged.
SOLUTION
Set the power switch to the "0N"
( I ) position.
Connect the power cord to the
power supply.
Try another electrical outlet.
Let it cool, and start the product
again.
Pull the spray gun trigger.
Replace with a 1" (25 mm) or
5/8" (16 mm) garden hose.
Check garden hose for kinks,
leaks, and blockage.
0pen the water supply fully.
Install desired spray tip to end
of wand.
Remove filter and rinse in warm
water.
21
Publicité
