OPERATION
1. Uncoil the garden hose.
2. Let the water flow through the garden hose for 30 seconds.
3. Turn the water supply off.
4. Install and tighten the end of the garden hose to the water inlet connector.
There must be a minimum of 9.8 feet of free hose between the water inlet and the water supply.
USE THE SPRAY GUN
For safe control, keep your hands on the gun at all times.
•
Pull and hold the spray gun trigger to start the product.
•
Release the spray gun trigger to stop water flow through the spray tip.
!
CAUTION
!
WARNING
13