OPERATION
Follow instructions on the solution bottle to prepare detergent.
Note: If it is necessary, use a funnel to prevent the spill of detergent. Clean and dry the spilled
detergent when you fill it.
Note: Soap/detergent can only be applied with this machine when the black nozzle (75 degree) is installed.
1. Put the machine vertically on a flat surface.
2. 0pen the cap on the detergent tank.
3. Put the detergent into the detergent tank.
4. Close the cap.
Note: Do not let detergent dry on the surface to prevent streaks.
START THE PRODUCT
Before you start the product
1. Turn the water supply on.
2. Pull the gun trigger to release air pressure.
3. If a stable stream of water comes into view, release the spray gun trigger.
16
!
WARNING
!
CAUTION