Maintenance; Long Term Storage; Maintenance Procedures - Ryobi RAP200 Manuel D'utilisation

WARNING:
When servicing, use only identical replacement parts.
Use of any other parts may create a hazard or cause
product damage.
WARNING:
Always wear eye protection with side shields marked to
comply with ANSI Z87.1. Failure to do so could result
in fluids entering your eyes resulting in possible serious
injury.

MAINTENANcE PROcEDURES

Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types of
commercial solvents and may be damaged by their use. Use
clean cloths to remove dirt, dust, oil, grease, etc.
WARNING:
Do not at any time let brake fluids, gasoline, petroleum
based products, penetrating oils, etc., come in contact
with plastic parts. Chemicals can damage, weaken, or
destroy plastic which may result in serious personal
injury.

MAINTENANcE

LONG-TERM STORAGE
See Figure 22, page 18.
When storing the paint station for 16 hours or more, a thorough
cleaning is recommended.
 Shutdown paint station.
 Thoroughly clean paint station and sprayer according to
instructions.
 Be sure that machine and tubes are clear any water or
fluid as these may freeze.
 Coil 25 ft. high pressure hose and store on back of tool
with hook and loop straps.
 Keep intake tube and prime tube in 3.5 gallon paint
container. Store filter and sprayer in plastic bag and seal.
 Fold handle over front of tool.
13 — English