14. Place the filter foam (26 + 27) back in the correct order and install the
black cap (32).
15. Place the seal (30) back on top of the tank (31) (use Vaseline, if
necessary).
16. Place the cover (9) on the tank (31) and screw the clamping ring (28 + 29)
back on.
17. Clean the quartz glass (21) with warm water and a soft cloth or sponge.
Dry it thoroughly and make sure that no water remains in the quartz glass
(21).
18. Place the black O-ring (A) and the red O-ring (B) back on (see Figure 9).
19. Slide the quartz glass (21) carefully back into the cover (9).
20. Carefully place the cover plate (2) with UV-C lamp (20) back on the cover
(9) and in the quartz glass (21).
21. Tighten the 6 cover plate (2) screws.
22. Put the pump into operation by plugging it into the power outlet.
23. If no leaking is found, you can also put the UV into operation by plugging it
into the power outlet. The UV-C lamp, which is on the control panel under
the lever (I), will turn blue.
In the winter
-
Protect the pressure filter from frost.
-
Remove the water out of the pressure filter before the frost season sets in.
-
Clean the pressure filter as described earlier, before putting it in storage.
-
Store it in a dry and frost-free area.
Removal and storage of waste
All household electrical appliances must be removed in accordance with EU directives.
The product may not be disposed of with the normal household waste, but should be
collected separately.
You are personally responsible for bringing the device to a designated landfill site. It must be
dismantled and processed in an environment-friendly manner.
More information on local landfill sites can be obtained from the municipality in which you
live.
Warranty conditions
The pressure filter is covered by a 24-month warranty from the date of purchase. Please
keep the receipt for future reference.
Within the period specified, repair or replacement of damage caused as a result of
manufacturing and/or material defect will be free of charge. UV-C lamp, quartz glass, normal
wear and tear, dry running, operating errors, scale, lack of maintenance, freezing, improper
repairs and damage caused by improper use are not covered by the warranty.
Any modification or alteration of the pressure filter, such as shortening the power cord or
cutting the plug off, will render the warranty null and void.
The supplier is not liable for consequential damage arising from pressure filter failure or
misuse.
For warranty claims, bring the product, the product warranty and receipt to the retailer.
English
30