Publicité
Les langues disponibles
Les langues disponibles
3.4 Preparing for use
Check that the mattress is attached to
the mesh base properly.
Only adjust the mesh base while it is in
a horizontal position, securely fixed to
the supporting legs, or to the supports
provided within the bed surround.
3.5 Tips for use
A new mattress has a certain amount of
rigidity, which will disappear within a few
days. Consequently, your mattress will
not optimally follow the contours of the
mesh base when it is initially adjusted.
We therefore recommend that you lie
down on the mattress while adjusting
the positions for the first time.
GB20
_03QVU_4459 BW.pdf - pag.20
4. Use
4.1 Setting the Comfortslides
The mesh base can be adapted to the
shape of your body. The slides are
incorporated in the mesh base at both
shoulder and hip level.
• Remove the mattress from the mesh
base.
• The illustrations of the various
positions of the Comfortslides
examples only. You can of course set
the slides to the position you
consider the most comfortable.
• Lift the slides slightly, then slide
them to the desired positions.
• Replace the mattress on the mesh
base.
For technical reasons AVS mesh bases
wider than 120 cm cannot be equipped
with Comfortslides
LET OP !!! Lage resolutie!
®
®
are
®
.
November 17, 2009
Publicité
