Turning On The Power; Power Save Mode; Checking Batteries - Sony HVL-F32M Mode D'emploi

Turning on the power

Set the POWER switch to ON.
When the power of the flash unit is turned on, the LCD panel lights up.

Power save mode

The flash unit will turn off if it is not operated for 3 minutes when used
by itself or connected to a camera that is in power save mode.
• During wireless flash photography (page 29), the flash unit changes to
power save mode after 60 minutes.
• The flash unit automatically changes to power save mode when the
power switch of the camera* is set to OFF.
* Except the DSLR-A100

Checking Batteries

The low-battery indicator appears on the LCD panel when the batteries
are low.
18
GB
blinking
Recommended to change
batteries.
You can still use the flash unit
even in this situation.
Only blinking
Flash cannot be used.
Insert new batteries.