emerio CG-110744.2 Mode D'emploi page 5

PARTS IDENTIFICATION
1. Handle
2. Upper housing
3. Upper cooking plate
4. Release button for upper plate
5. Bottom housing
6. Bottom cooking plate
7. Control panel (see below)
8. Release button for bottom plate
9. Hinge release button
10. Oil drip tray
CONTROL PANEL ILLUSTRATION
Power switch
Frozen food Bacon
Indicator Light Status:
① Preheating ; ② Start to cook; ③ (food) Rare; ④ (food) Medium; ⑤ (food) Well done
BEFORE INITIAL USE
1. Remove all packaging.
2. Clean the surfaces with a soft damp cloth then dry them. You can also remove the two non-stick plates and
wash them in warm soapy water (see "CLEANING AND MAINTENANCE"). Remember to dry them completely
before use. Never immerse the main body of appliance in water or other liquids.
3. Unwind the mains cable completely.
Notice: When your grill is heated for the first time, it may emit slight smoke or odor. This is normal and harmless.
HOW TO USE
Intelligent Mode (Not applicable when the appliance is used in 180° open position):
1. Put the plug into the power outlet. There will be beep sound.
2. Press the power switch. The indicator lights blink through the five indicators successively and repetitively to
remind you to choose the food category on the control panel. For example, you want to roast some beef, so you
press the "Beef" button. After you select the food category, the five indicator lights will blink together.
3. Press the "OK" button when all the setting is ready. Let the appliance start preheating. Only the "PREHEATING"
indicator light will blink now.
4. Once the cooking plates reach the required temperature, there will be beep sound to tell that the preheating is
- 4 -
Manual mode
①
Chicken Sausage
②
③
Beef Fish Burger
⑤
④
Ready button
CG-110744.2