Connection - ETNA AI553RVS Mode D'emploi

INSTALLATION

Connection

EN 10
Electric connection
This appliance is fitted with an earthed plug, which
should be connected to an earthed wall socket.
Make sure the supply voltage ratings correspond with those stated on
the appliance data plate. The connection to the mains is carried out as
follows:
BROWN = L live
BLUE = N neutral
GREEN/YELLOW = earth
This canopy hood has been provided with a power plug. When installing
the hood, make sure that this plug remains accessible. We recommend
installing the wall socket out of view, behind the chimney cover.
Attention:
If you want to make a fixed connection, ensure that a multi-pole switch
with a distance between contacts of 3 mm is installed in the supply
cable.
max. 140 cm