Siemens KG39NXWEC Notice D'utilisation page 33

en
Controls
Fig. $
* Not all models.
1
Refrigerator compartment
display panel
2
Freezer compartment display
panel
3
Temperature display freezer
compartment
The numbers correspond
to the set freezer compartment
temperatures in °C.
4
Button "lock" function
If this function is switched on, no
settings are possible via
the controls.
5
Alarm button
Used to switch off the warning
signal, see chapter "Alarm
function".
6
Setting buttons
You can use the "+" and "–"
button to set the temperature of
the refrigerator and freezer
compartment. In addition, special
functions can be switched on
and off.
7
Selection button for appliance
zone
To make settings for one
appliance zone, repeatedly press
the selection button.
8
Temperature display refrigerator
compartment
The numbers correspond to the
set refrigerator compartment
temperatures in °C.
32
Switching on the
appliance
1. First insert the plug into the
connection on the back of the
appliance. Check that the plug has
been inserted all the way.
2. Then insert the other end of the cable
into the socket.
The appliance is now switched on and a
warning signal sounds.
Press the alarm off button to switch off
the audible warning signal.
The alarm off display goes out when the
appliance has reached the set
temperature.
The preset temperatures are reached
after several hours. Do not put any food
in the appliance beforehand.
The factory has recommended
the following temperatures:
Freezer compartment: -18 °C
■
Refrigerator compartment: +4 °C
■
Operating tips
After the appliance has been switched
■
on, it may take several hours until the
set temperatures have been reached.
The fully automatic NoFrost system
■
ensures that the freezer section
remains free of ice. Defrosting is no
longer required.
If the door cannot be immediately re-
■
opened after it has been closed, wait
until the resulting low pressure has
equalised.
The front and side panels
■
of the housing are partly heated
slightly.This prevents condensation
from forming.