Hilti Nuron SF 6H-22 Mode D'emploi page 21

6 Operation
CAUTION
Risk of injury if the accessory tool stalls !
▶ Check that the side handle is fitted correctly and tightened securely.
Always hold the tool with both hands on the grips provided.
▶ Wear eye protection to prevent splintering material from injuring your
eyes.
Observe the safety instructions and warnings in this documentation and on
the product.
6.1 Selecting the gear
▶ Select the gear.
6.2 Setting forward or reverse rotation
▶ Set the forward/reverse switch to forward or reverse rotation, as appli-
cable.
6.3 Switching on
▶ Press the control switch.
▶ The product starts.
Speed can be controlled steplessly by varying how far the control
switch is pressed in.
6.4 Screwdriving
▶ Set the torque and operating mode selector ring to the required torque.
6.5 Drilling 6
▶ Set the torque and operating mode selector ring to
6.6 Hammer-action drilling
▶ Set the torque and operating mode selector ring to
6.7 Switching off
▶ Release the control switch.
▶ The product switches off.
*2275218*
4
6
6
2275218
5
.
.
English 15