Publicité
Step 7
th
Install the 6
log on the right in front of the burner holes and with the thin twig over the burner where the
rd
single row of holes are and on top of the 3
log.
Step 8
Install the ceramic rocks in an esthetically pleasing pattern, as few or as many as you want. The rocks
may not be placed over any of the burner holes or the vent holes at the front of the burner so they do not
affect the burn pattern in any way.
Step 9
Carefully scatter the glass pebbles over the burner pan. These can go over the burner holes. Make sure
none of the pebbles drop into the pilot assembly hole or down into any of the fans. Do not cover the vent
holes in the front of the burner pan. Your finished media should resemble the picture below.
Page 37 of 58
Publicité
