Publicité
Les langues disponibles
Les langues disponibles
Read the "Safety Instructions" secti-
on first.
*Optional: Shown functions are optional,
there may be differences of shape and lo-
cation in functions found on your applian-
ce's indicator panel.
Auditory and visual functions on the indica-
tor panel will assist you in using the refrige-
rator.
1. Error Condition Indicator
This indicator will be active when your refri-
gerator cannot perform adequate cooling
or in case of any sensor error. "E" will be
displayed on the freezer compartment tem-
perature indicator and figures such as
1,2,3... will be displayed on the cooler com-
partment temperature indicator. These figu-
res provide information to the authorized
service on the error that has occurred.
Exclamation mark may be displayed for a
while when you load warm food to the free-
zer compartment or keep the door open for
a long period of time. This is not a fault,
this warning will be removed when the food
is cooled down or when any key is pressed.
2. Energy Saving (Display Off) Indicator
Energy saving function is enabled automati-
cally and the energy saving symbol lights
up when the door of the product is not ope-
ned or closed for some period of time.
When the energy saving function is active,
all symbols on the screen except the ener-
gy saving symbol will be turned off. When
the energy saving function is active, if you
press any key or open the door, the energy
saving function will be deactivated and the
symbols on the screen will return to nor-
mal. The energy saving function is a functi-
on activated ex-factory and cannot be can-
celled.
3. *Wireless Key
When the key is pressed for a long period
(3 seconds), the wireless connection sym-
bol on the display/screen flashes slowly (at
0.5 second intervals). The home network is
initialized on the product this way.
After achieving wireless connection with
the product, wireless connection symbol il-
luminates continuously.
When the initial connection is established,
you may activate/deactivate the connecti-
on with a short press on this key. The wire-
less connection symbol will flash quickly
(at 0.2 second intervals) until the connecti-
on is established. When the connection is
active, the wireless network symbol will illu-
minate continuously.
If the connection cannot be established for
a long period, check your connection set-
tings and refer to the "Troubleshooting"
section provided in the user manual.
HomeWhiz application will be used for wi-
reless connection. The installation steps
are described on the application during in-
stallation.
You may access the application by reading
the QR code available on the HomeWhiz la-
bel on the product. Application is offered
through App Store for IOS devices, and
through Play Store for Android devices.
Visit https://www.homewhiz.com/ address
for detailed information.
4. Cooler Compartment Temperature
Setting Key
Allows setting of temperature for cooler
compartment. Pressing this key will enable
the cooler compartment temperature to be
set at 8, 7, 6, 5, 4, 3, 2 and 1 °C.
5. The Freezer Compartment Tempera-
ture Setting Key
Temperature setting is made for freezer
compartment. When the key is pressed, the
freezer compartment temperature can be
set at the values of -18, -
19, -20, -21, -22, -23, -24 °C.
6. *Support Service Key
Press this key for 3 seconds to activate/de-
activate the support service. Detailed infor-
mation on the support service is provided in
the "Support Service Feature" section.
DE / 76
EN
FR
DE
RO
Publicité
